Nokia Asha 206 Display Problem Solution and Trick Jumper Ways --- long time no see you with all my friends, hopefully in a fine state. ok on this occasion udugscell want to share information about how to repair the damage to the display screen on the Nokia Asha 206. This guide also support for blank white screen, the screen does not appear, the problem on the screen, and tricks on how to jumper socket path screen. see the image below to complete damage to the screen of your Nokia Asha 206.
Equipment Required
- Fine wires
- Tin.
- Solder.
- Tester.
- Scissors
How to Make a Jumper in the Socket Display
- Prepare a cable smooth and adjust the length that we will connect its tracks
- Heat Tin with solder for attaching fine wires so that it will closely united.
- Use a voltage tester to measure the jumper cables.
Tips & Warning
- Make sure the jumper cables are connected properly so that it can deliver a good flow.
- Make sure that the jumper cables are not connected directly with the other jumper cable.
The only hint of udugscell on how to make a lane jumper socket on the Nokia Asha 206. good luck
