Trick Jumper for N70 White Screen, hang, Can not loading and Screen blank Problem Solution --- N70 white screen, hang and Tricks way Jumper 100% tested. Here I want to share a simple little trick with you all. Here Analysis Of Mobile want to tell you about N70 white screen, hang and tricks jumper. is for the discussion of this issue maybe every one have been to share on internet. but for this time I will explain in more detail. one day I ever repair N70 white screen and hangs but never succeeded. the phone is already over 5 months on my counter. actually I was desperate to fix this phone. and finally I thought to try to re-check the damage to the mobile phone. My trick is to with use a N70 is still good and I measure all the points associated with the appearance of the screen. well, it turns out my phone can be operated again with trick jumper. the trick is only for N70 white screen, hang, no loading, the screen does not appear and the screen blank.
The following steps should we do to fix N70 white screen and hangs.
- Please remove 2 pieces of components / ic as shown in figure (steps 1) caution in the removal of the two components, if you use the heater to remove it should not be too hot. This resulted in the other components that might too easy is broken or not stand the heat.
- In this step we make a jumper on N70 (making cable connections) as in steps 2 at the blue line. if the first step has been no change on your mobile please go to steps 3, note: jumper cables in steps 2 do not need you to decide just please continue to step three.
- Note the picture above to perform this step. make a jumper cable like the light blue line markings. If at this step N70 you can not or do not perform loading please try step 4. note: by not releasing the jumper cable on the steps that have been completed we can make a jumper cable in step 4.
- In step 4 is you also have to make a jumper. for more details please see the picture (Steps 4 on the green line) if it turns out in this step your phone also do not work then please try the next step. note: not released the jumper cables that you created in the previous step.
- Note the picture above to perform step 5. make a jumper cable to connect the 2 pieces of the capacitor. according to my experience of all forms of jumper above has made my phone can operate again.
Attention on the image above there is a path you must take is : (Make sure the line was connected) means you must measure both the above lines. whether disconnected or already connect? if still disconnected please make jumper as shown above.
That's a little trick of mine to help your trouble. Analysis Of Mobile hope the simple this trick can help you to repair a N70 white screen, hang, no loading, the screen may not appear and the N70 can not be operated. you may also be interested in our other tricks Nokia C1-01 Insert Sim Card Problem Solution and Trick Jumper IC. tricks of luck hopefully we can help you trouble
